Category:
PA AMPLIFIER
HIGH POWER PA AMPLIFIER
SSA – 5000M
500 WATTS
AC & 36V DC OPERATION
- 7 Mic & 2 Aux Inputs.
- Preamplifier and line output for connecting to a Booster Amplifier and for recording the program.
- Line input for connecting the output from any external Mixer or permitting SSA 5000M to be used as a Booster Power Amplifier.
- Resettable circuit breaker for protection against Overload and short circuit.
- Instant transfer to DC power (car Batt.) If AC power fails. Box Speaker/driver unit selector switch.
| SPECIFICATIONS | SSA-5000M |
| POWER SUPPLY | AC:220-250V 50/60Hz DC: 36V (3 x 12V Car Batt.) |
| POWER CONSUMPTION | AC: 750 VA DC: 8A |
| POWER OUTPUT | 750W MAX. |
| AT 10% THD 500W RMS | |
| AT 5% THD 450W RMS | |
| OUTPUT REGULATION | < 2dB,NO LOAD TO FULL LOAD AT 1KHz |
| INPUT CHANNELS | 7X MIC 0.9mV/4.7K |
| 2X AUX. 100mV/470K | |
| 1XLINE 1V/50K | |
| FREQUENCY RESPONSE | 50-15,000Hz + 3dB |
| SIGNAL TO NOISE RATIO | 60dB |
| TONE CONTROLS | BASS : + 10dB at 100Hz |
| TREBLE : + 10dB at 10KHz | |
| OUTPUTS | PREAMP 200mV/1K, LINE 1V / 1K |
| SPEAKER OUTPUTS | 4 Ohm, 8 Ohm, 70V &100V |
| DIMENSIONS | W510XD385XH172mm |
| NET WEIGHT | 23.200Kg |
PA AMPLIFIER
PA AMPLIFIER
SPA – 5000
500 WATTS
AC & 36V DC OPERATION
- Line input 200mV / 1V switchable for connecting a Mixer or another Amplifier.
- Resettable circuit breaker for protection against overload and short circuit.
- Instant transfer to DC power (car Batt.) If AC power fails. Box speaker/driver unit selector switch.
- By connecting two booster Amplifiers SPA-5000 to one SSA-5000M, the user can have a 1500W mono system.
| SPECIFICATIONS | SPA-5000 |
| POWER SUPPLY | AC 220-250V 50/60Hz DC: 36V (3 x 12V Car Batt.) |
| POWER CONSUMPTION | AC: 750 VA DC: 8A |
| POWER OUTPUT | 750 MAX. |
| AT 10% THD 500W RMS | |
| AT 5% THD 450W RMS | |
| OUTPUT REGULATION | < 2dB,NO LOAD TO FULL LOAD AT 1KHz |
| INPUT CHANNELS | ......... |
| 1XLINE 200mV/100K | |
| 1XLINE 1V/50K | |
| FREQUENCY RESPONSE | 50-15,000Hz + 3dB |
| SIGNAL TO NOISE RATIO | 60dB |
| TONE CONTROLS | BASS : + 10dB at 100Hz |
| TREBLE : + 10dB at 10KHz | |
| OUTPUTS | ......... |
| SPEAKER OUTPUTS | 4 Ohm, 8 Ohm, 70V &100V |
| DIMENSIONS | W510XD385XH172mm |
| NET WEIGHT | 22.200Kg |
PA AMPLIFIER
HIGH POWER PA AMPLIFIER
SSA-350M
415 WATTS MAX.
AC & 24V DC OPERATION
- 6 Mic & 2 Aux Inputs.
- Pre Amplifier and line output for connecting to a Booster Amplifier and for recording the program.
- Resettable circuit breaker for protection against overload and short circuit.
- Instant transfer to DC power (car batt.) If AC power fails.
- Box Speaker/driver unit selector switch.
- By connecting two booster Amplifiers SPA-5000 to one SSA-350M, the user can have a 1350W mono system.
| SPECIFICATIONS | SSA-350M |
| POWER SUPPLY | AC : 220-250V 50/60Hz, DC : 24V (2X12V Car Battery) |
| POWER CONSUMPTION | AC : 625VA, DC : 6A |
| POWER OUTPUT | 415W MAX., AT 10% THD 350W RMS |
| AT 5% THD 315W RMS | |
| OUTPUT REGULATION | < 2dB, NO LOAD TO FULL LOAD AT 1KHz |
| INPUT CHANNELS | 6X MIC 0.5mV/4.7K |
| 2X AUX55mV/470K | |
| 1 X LINE 1V/50K | |
| FREQUENCY RESPONSE | 50-15,000Hz + 3dB |
| SIGNAL TO NOISE RATIO | 60dB |
| TONE CONTROLS | BASS : + 10dB at 100Hz |
| TREBLE : + 10dB at 10KHz | |
| OUTPUTS | PREAMP 200mV/1K, LINE 1V / 1K |
| SPEAKER OUTPUTS | 4 Ohm, 8 Ohm, 70V &100V |
| DIMENSIONS | W450XD344XH155mm |
| NET WEIGHT | 16.610 Kg. |
PA AMPLIFIER
HIGH POWER PA AMPLIFIER
SSA-250M
300 WATTS MAX.
AC & 24V DC OPERATION
- 6 Mic & 2 Aux Inputs.
- Pre Amplifier and line output for connecting to a Booster Amplifier and for recording the program.
- Line input for connecting the output from any external Mixer or permitting SSA-250M to be used as a booster power amplifier.
- Resettable circuit breaker for protection against overload and short circuit.
- Instant transfer to DC power (car batt.) If AC power fails.
- Box Speaker/driver unit selector switch.
| SPECIFICATIONS | SSA-250M |
| POWER SUPPLY | AC : 220-250V 50/60Hz, DC : 24V (2X12V Car Battery) |
| POWER CONSUMPTION | AC : 500VA, DC : 6A |
| POWER OUTPUT | 300W MAX., AT 10% THD 250W RMS |
| AT 5% THD 220W RMS | |
| OUTPUT REGULATION | < 2dB, NO LOAD TO FULL LOAD AT 1KHz |
| INPUT CHANNELS | 6X MIC 0.6mV/4.7K |
| 2X AUX. 70mV/470K | |
| 1 X LINE 1V/10K | |
| FREQUENCY RESPONSE | 50-15,000Hz + 3dB |
| SIGNAL TO NOISE RATIO | 60dB |
| TONE CONTROLS | BASS : + 10dB at 100Hz |
| TREBLE : + 10dB at 10KHz | |
| OUTPUTS | PREAMP 200mV/1K, LINE 1V / 1K |
| SPEAKER OUTPUTS | 4 Ohm, 8 Ohm, 70V &100V |
| DIMENSIONS | W450XD344XH155mm |
| NET WEIGHT | 16.300 Kg. |
PA AMPLIFIER
PA AMPLIFIER
BR – 250M
250 WATTS
AC & 24V DC OPERATION
- Line input 200mV / 1V switchable for connecting a mixer or another amplifier.
- Resettable circuit breaker for protection against overload and short circuit.
- Instant transfer to DC power (car Batt.) If AC power fails. Box Speaker/driver unit selector switch.
- By connecting three booster Amplifiers BR-250M to one SSA-250M, the user can have a 1000W mono system.
| SPECIFICATIONS | BR-250M |
| POWER SUPPLY | AC 220-250V 50/60Hz DC : 24V (2 x 12V Car Batt.) |
| POWER CONSUMPTION | AC: 500 VA DC: 6A |
| POWER OUTPUT | 300W MAX. |
| AT 10% THD 250W RMS | |
| AT 5% THD 220W RMS | |
| OUTPUT REGULATION | < 2dB,NO LOAD TO FULL LOAD AT 1KHz |
| INPUT CHANNELS | ------------- |
| 1XLINE 200m V/100K | |
| 1XLINE 1V/50K | |
| FREQUENCY RESPONSE | 50-15,000Hz + 3dB |
| SIGNAL TO NOISE RATIO | 60dB |
| TONE CONTROLS | BASS : + 10dB at 100Hz |
| TREBLE : + 10dB at 10KHz | |
| OUTPUTS | ---------- |
| SPEAKER OUTPUTS | 4 Ohm, 8 Ohm, 70V &100V |
| DIMENSIONS | W450XD344XH155mm |
| NET WEIGHT | 15.200Kg |
PA AMPLIFIER
PA AMPLIFIER
SSA – 160M
160 WATTS
AC & 24V DC OPERATION
- 5 Mic & 2 Aux inputs.
- Pre Amplifier and line output for connecting to a booster Amplifier and for recording the program.
- Line input for connecting the output from any external Mixer or permitting SSA 160M to be used as a booster power Amplifier.
- Resettable circuit breaker for protection against overload and short circuit.
- Instant transfer to DC power (car Batt.)If AC power fails. Box speaker/driver unit selector switch.
| SPECIFICATIONS | SSA-160M |
| POWER SUPPLY | AC 220-250V 50/60Hz DC: 24V (2 x 12V Car Batt.) |
| POWER CONSUMPTION | AC: 300VA DC:4A |
| POWER OUTPUT | 200W MAX. |
| AT 10% THD 160W RMS | |
| AT 5% THD 145W RMS | |
| OUTPUT REGULATION | < 2dB,NO LOAD TO FULL LOAD AT 1KHz |
| INPUT CHANNELS | 5X MIC 0.6mV/4.7K |
| 2X AUX. 70mV/470K, | |
| 1XLINE 1V/10K | |
| FREQUENCY RESPONSE | 50-15,000Hz + 3dB |
| SIGNAL TO NOISE RATIO | 60dB |
| TONE CONTROLS | BASS : + 10dB at 100Hz |
| TREBLE : + 10dB at 10KHz | |
| OUTPUTS | PREAMP 200mV/1K, LINE 1V / 1K |
| SPEAKER OUTPUTS | 4 Ohm, 8 Ohm, 70V &100V |
| DIMENSIONS | W420XD300XH145mm |
| NET WEIGHT | 12.725Kg |
PA AMPLIFIER
HIGH POWER PA AMPLIFIER
SSB-160E (with Echo)
175 WATTS MAX.
AC & 12V DC OPERATION
- 6 Mic & 2 Aux Inputs.
- Line input for connecting to a booster Amplifier.
- Mic 1-4 inputs are provided with Echo on/off selector switch.
- Delay control for selecting the number between Echo repetitions.
- Repeat Control to control the number of repetitions of Echo.
- Instant transfer to DC power (car batt.) If AC power fails.
- Box Speaker/driver unit selector switch.
| SPECIFICATIONS | SSB-160E (WITH ECHO) |
| POWER SUPPLY | AC : 220-250V 50/60Hz, DC : 12V (Car Battery) |
| POWER CONSUMPTION | AC : 320VA, DC : 13A |
| POWER OUTPUT | 175W MAX., 160W RMS AT 10% THD |
| 120W RMS AT 5% THD | |
| OUTPUT REGULATION | < 2dB, NO LOAD TO FULL LOAD AT 1KHz |
| INPUT CHANNELS | 6X MIC 0.6mV/4.7K |
| 2X AUX. 55mV/470K | |
| ----- | |
| FREQUENCY RESPONSE | 50-15,000Hz + 3dB |
| SIGNAL TO NOISE RATIO | 60dB |
| TONE CONTROLS | BASS : + 10dB at 100Hz |
| TREBLE : + 10dB at 10KHz | |
| OUTPUTS | LINE 1V / 1KOhm |
| SPEAKER OUTPUTS | 4 Ohm, 8 Ohm, 70V &100V |
| DIMENSIONS | W465XD330XH140mm |
| NET WEIGHT | 12.250 Kg. |
PA AMPLIFIER
PA AMPLIFIER
SSA – 125
125 WATTS
AC & 12V DC OPERATION
- 6 Mic & 2 Aux Inputs.
- Pre Amplifier and line output for connecting to a Booster Amplifier and for recording the program. 5 – LED Array for output level monitoring.
- Instant transfer to DC power (car batt.) If AC power fails.
| SPECIFICATIONS | SSA-125 |
| POWER SUPPLY | AC : 220-250V 50/60Hz DC : 12V (Car Battery) |
| POWER CONSUMPTION | AC : 240VA DC : 10 A |
| POWER OUTPUT | 150W MAX., 125W RMS AT 10% THD |
| 100W RMS AT 5% THD | |
| OUTPUT REGULATION | < 2dB,NO LOAD TO FULL LOAD AT 1KHz |
| INPUT CHANNELS | 6X MIC 0.6mV/4.7K |
| 2X AUX. 70mV/470K, | |
| FREQUENCY RESPONSE | 50-15,000Hz + 3dB |
| SIGNAL TO NOISE RATIO | 60dB |
| TONE CONTROLS | BASS : + 10dB at 100Hz |
| TREBLE : + 10dB at 10KHz | |
| OUTPUTS | PREAMP 200mV/1K, LINE 1V / 1K |
| SPEAKER OUTPUTS | 4 Ohm, 8 Ohm, 16 Ohm 70V &100V |
| DIMENSIONS | W410XD330XH140mm |
| NET WEIGHT | 11.890Kg |
PA AMPLIFIER
HIGH POWER PA AMPLIFIER
SSA – 110M
110 WATTS
AC & 24V DC OPERATION
- 5 Mic & 1 Aux Inputs.
- Pre Amplifier output for connecting to a booster Amplifier and for recording the program.
- Instant transfer to DC power (car batt.) If AC power fails.
| SPECIFICATIONS | SSA-110M |
| POWER SUPPLY | AC 220-250V 50/60Hz DC: 24V (Car Batt.) |
| POWER CONSUMPTION | AC : 250VA DC : 5A |
| POWER OUTPUT | 140W MAX. |
| AT 10% THD 110W RMS | |
| AT 5% THD 90W RMS | |
| OUTPUT REGULATION | < 2dB,NO LOAD TO FULL LOAD AT 1KHz |
| INPUT CHANNELS | 5X MIC 0.6mV/4.7K |
| 1X AUX. 70mV/470K, | |
| FREQUENCY RESPONSE | 50-15,000Hz + 3dB |
| SIGNAL TO NOISE RATIO | 60dB |
| TONE CONTROLS | BASS : + 10dB at 100Hz |
| TREBLE : + 10dB at 10KHz | |
| OUTPUTS | PREAMP 200mV/1K |
| SPEAKER OUTPUTS | 4 Ohm, 8 Ohm, 16 Ohm & 100V |
| DIMENSIONS | W402XD304XH129mm |
| NET WEIGHT | 11.050Kg |
PA AMPLIFIER
HIGH POWER PA AMPLIFIER
SSB-110
140 WATTS MAX.
AC & 12V DC OPERATION
- 6 Mic & 2 Aux Inputs.
- Pre Amplifier output for connecting to a booster Amplifier and for recording the program.
- Instant transfer to DC power (car batt.) If AC power fails.
| SPECIFICATIONS | SSB-110 |
| POWER SUPPLY | AC : 220-250V 50/60Hz, DC : 12V (Car Battery) |
| POWER CONSUMPTION | AC : 220VA, DC : 9A |
| POWER OUTPUT | 140W MAX., AT 10% THD 110W RMS |
| AT 5% THD 80W RMS | |
| OUTPUT REGULATION | < 2dB, NO LOAD TO FULL LOAD AT 1KHz |
| INPUT CHANNELS | 6X MIC 0.6mV/4.7K |
| 2X AUX. 70mV/470K | |
| ----- | |
| FREQUENCY RESPONSE | 50-15,000Hz + 3dB |
| SIGNAL TO NOISE RATIO | 60dB |
| TONE CONTROLS | BASS : + 10dB at 100Hz |
| TREBLE : + 10dB at 10KHz | |
| OUTPUTS | preamp 200mV/1K, LINE 1V/1K |
| SPEAKER OUTPUTS | 4 Ohm, 8 Ohm, 16Ohm & 100V |
| DIMENSIONS | W410XD330XH140mm |
| NET WEIGHT | 11.000 Kg. |