Category:
PA AMPLIFIER
DUAL CHANNEL POWER AMPLIFIER
XP-4K5
2250+2250 WATTS MAX.
AC Operation
Stereo music for DJ programmes.
High quality lovv distortion output
Show the input voltage & frequency.
Independent digital bargraph for each channel.
Stero/mono selector switch.
Digital indication of short circuit & temp. Protection.
Force Cooling by both channels.
| SPECIFICATIONS | XP-4K5 |
| POWER SUPPLY | AC: 220-250V 50/60Hz |
| POWER CONSUMPTION | 5500 VA |
| POWER OUTPUT at 2 Ohm | 2250W + 2250W MAX., 2000W + 2000W RMS at 10% THD |
| OUTPUT REGULATION | < 1dB,NO LOAD TO FULL LOAD AT 1KHz |
| INPUT IMPEDANCE | 10K |
| INPUT CHANNELS | STEREO L/R 1V/47K, Mono 1V/47K |
| FREQUENCY RESPONSE | 20-20,000Hz + 3dB |
| SIGNAL TO NOISE RATIO | 80dB |
| SPEAKER OUTPUTS | 2 Ohm + 2 Ohm |
| COOLING | FORCE COOLING ( 2x 120mm AC FAN) |
| PROTECTIONS | 20A RESET TYPE CIRCUIT BREAKER IN AC MAINS |
| DIMENSIONS | W565XD560XH155mm |
| NET WEIGHT | 30.000 Kg. |
PA AMPLIFIER
DUAL CHANNEL POWER AMPLIFIER
XP – 3502
2000W + 2000W MAX.
AC Operation
Stereo Music for DJ Programs.
High quality low distortion output.
Show the input voltage & frequency
Independent digital bargraph for each channel.
Stero/mono selector switch.
Digital indication of short circuit & temp. Protection.
Force Cooling by both channels.
| SPECIFICATIONS | XP-3502 |
| POWER SUPPLY | AC: 220-250V 50/60Hz |
| POWER CONSUMPTION | 5000 VA |
| POWER OUTPUT at 2 Ohm | 2000W + 2000W MAX., 1750W + 1750W RMS at 10% THD |
| OUTPUT REGULATION | < 1dB,NO LOAD TO FULL LOAD AT 1KHz |
| INPUT IMPEDANCE | 10K |
| INPUT CHANNELS | STEREO L/R 1V/47K, Mono 1V/47K |
| FREQUENCY RESPONSE | 20-20,000Hz + 3dB |
| SIGNAL TO NOISE RATIO | 80dB |
| SPEAKER OUTPUTS | 2 Ohm + 2 Ohm |
| COOLING | FORCE COOLING ( 2x 120mm AC FAN) |
| PROTECTIONS | 20A RESET TYPE CIRCUIT BREAKER IN AC MAINS |
| DIMENSIONS | W555XD500XH152mm |
| NET WEIGHT | 30.000 Kg. |
PA AMPLIFIER
DUAL CHANNEL POWER AMPLIFIER
PX-2500D
1250 + 1250 WATTS MAX.
AC Operation
Stereo Music for DJ Programs.
High quality low distortion output
Independent bargraph for each channel with clip indication.
Stero/mono selector switch.
Short Circuit, overload & overtemp. protections.
Force Cooling by both channels.
| SPECIFICATIONS | PX-2500D |
| POWER SUPPLY | 220-250V 50/60Hz |
| POWER CONSUMPTION | AC: 3500 VA |
| POWER OUTPUT at 2 Ohm | 1250 + 1250 W MAX., 1000W + 1000W RMS at 10% THD |
| OUTPUT REGULATION | < 2dB,NO LOAD TO FULL LOAD AT 1KHz |
| INPUT IMPEDANCE | 10K(UNBALANCED) |
| INPUT CHANNELS | STEREO L/R 0dBM/0.707V |
| FREQUENCY RESPONSE | 20Hz-20,000Hz + 1dB |
| SIGNAL TO NOISE RATIO | 80dB |
| SPEAKER OUTPUTS | 2 Ohm + 2 Ohm |
| COOLING | FORCE COOLING ( 2x 120mm AC fan ) |
| PROTECTIONS | 15A RESET TYPE CIRCUIT BREAKER |
| DIMENSIONS | W410XD420XH160mm |
| NET WEIGHT | 24.000 Kg. |
PA AMPLIFIER
DUAL CHANNEL POWER AMPLIFIER
XP – 2K2
1600W + 1600 WATTS
AC Operation
- Stereo music for DJ programmes.
- High quality low distortion output.
- Independent bargraph for each channel with clip indication.
- Stereo/mono selector switch.
- Short circuit, overload & overtemp. Protection.
- Force cooling for both channels.
XP-2K2 is a high output, high quality stereo power amplifier. it has good tonal quality due to the built in tone control. it has wide applications i.e. Disco, stage and P.A. Application.
| SPECIFICATIONS | XP – 2K2 |
| POWER SUPPLY | AC:220-250V 50/60Hz |
| POWER CONSUMPTION | 3300 VA |
| POWER OUTPUT at 2 Ohms | 1600W + 1600W MAX., 1500W + 1500W RMS AT 10% THD |
| OUTPUT REGULATION | < 1dB, NO LOAD TO FULL LOAD AT 1KHz |
| INPUT CHANNELS | STEREO L / R 160mV / 47K , MONO 160mV / 47K |
| FREQUENCY RESPONSE | 20-20,000Hz + 3dB |
| SIGNAL TO NOISE RATIO | 80dB |
| SPEAKER OUTPUTS | 2 Ohm + 2 Ohm |
| COOLING | FORCE COOLING ( 2x120mm AC FAN ) |
| PROTECTIONS | 15 Amp Ext. AC Fuse, 4x15 Amp INT. Fuse |
| DIMENSIONS | W555XD500XH152mm |
| NET WEIGHT | 25.000Kg |
PA AMPLIFIER
PA AMPLIFIER
XP – 1800D
950+950 WATTS
AC Operation
- Stereo music for DJ programmes.
- High quality low distortion output.
- Independent bargraph for each channel with clip indication.
- Stereo/mono selector switch.
- Short circuit, overload & overtemp. Protection.
- Force cooling for both channels.
XP-1800D is a high output, high quality stereo power amplifier. It has wide applications i.e. Disco, stage and P.A. Application.
| SPECIFICATIONS | XP – 1800D |
| POWER SUPPLY | AC:220-250V 50/60Hz |
| POWER CONSUMPTION | 2300 VA |
| POWER OUTPUT at 2 Ohms | 950W + 950W Max |
| OUTPUT REGULATION | < 1dB, NO LOAD TO FULL LOAD AT 1KHz |
| INPUT CHANNELS | STEREO L / R 160mV / 22K , MONO 160mV / 22K |
| FREQUENCY RESPONSE | 20-20,000Hz + 3dB |
| SIGNAL TO NOISE RATIO | 80dB |
| SPEAKER OUTPUTS | 2 Ohm + 2 Ohm |
| COOLING | FORCE COOLING ( 2x120mm AC FAN ) |
| PROTECTIONS | 15A RESET TYPE CIRCUIT BREAKER IN AC MAINS |
| DIMENSIONS | W420X425XH162mm |
| NET WEIGHT | 22.500Kg |
PA AMPLIFIER
DUAL CHANNEL POWER AMPLIFIER
PWM-1K2
650+650 WATTS MAX.
AC OPERATION
- Stereo Music for DJ Programmes.
- High quality low distortion output.
- Independent Bargraph for each channel with clip indication.
- Stero/mono selector switch.
- Short Circuit, Overload & Overtemp. protections.
- With in-built USB player.
| SPECIFICATIONS | PWM-1K2 |
| POWER SUPPLY | 220-250V 50/60Hz |
| POWER CONSUMPTION | AC: 1000 VA |
| POWER OUTPUT at 2 Ohms | 500 + 500W RMS AT 10% THD |
| OUTPUT REGULATION | < 2dB,NO LOAD TO FULL LOAD AT 1KHz |
| INPUT CHANNELS | STEREO 2X200mV/47K, MONO 200mV/47K |
| FREQUENCY RESPONSE | 50-15,000Hz + 3dB |
| SIGNAL TO NOISE RATIO | 80dB |
| SPEAKER OUTPUTS | 4Ohm + 4Ohm |
| TONE CONTROLS | BASS : + 10dB at 100Hz |
| BASS : MID : + 10dB at 1KHz | |
| TREBLE : + 10dB at 10KHz | |
| PROTECTIONS | 4X10A AC Fuse |
| DIMENSIONS | W495XD395XH105mm |
| NET WEIGHT | 12.500 Kg. |
PA AMPLIFIER
DUAL CHANNEL POWER AMPLIFIER
XP – 1.2D
690+690 WATTS
AC Operation
- Stereo Music for DJ Programs.
- Stereo / Mono Selector Switch.
- Very Low distortion with High quality outputs.
- Flat Frequency response
- Independent Bar graph for each channel with clip indication.
- Short Circuit, Over Load & Over Heat protections.
- Force Cooling by two fans.
| SPECIFICATIONS | XP – 1.2D |
| POWER SUPPLY | AC:220-250V 50/60Hz |
| POWER CONSUMPTION | 1700 VA |
| POWER OUTPUT at 2 Ohms | 690W + 690W MAX., 540W + 540W RMS AT 10% THD 500W + 500W RMS AT 5% THD |
| OUTPUT REGULATION | < 2dB,NO LOAD TO FULL LOAD AT 1KHz STEREO |
| INPUT CHANNELS | STEREO L / R 160mV / 47K , MONO 160mV / 47K |
| FREQUENCY RESPONSE | 20,000Hz + 2dB |
| SIGNAL TO NOISE RATIO | 80dB |
| TONE CONTROLS | BASS : + 10dB at 100Hz, MID : + 10dB at 1KHz, TREBLE : + 10dB at 10KHz 2 Ohm + 2Ohm |
| SPEAKER OUTPUTS | 2 Ohm + 2 Ohm |
| COOLING | FORCE COOLING ( 2x DC FAN ) |
| PROTECTIONS | 2X10A AC Fuse |
| DIMENSIONS | W485XD410XH110mm |
| NET WEIGHT | 14.600Kg |